[🎶SG] Audio Technica AT-VM95ML Dual Moving Magnet Cartridge

🎵 OFFICIAL Audio Technica DEALER - 1 Year Local Warranty & Aftersales Support


Contact Us:
📞 WhatsApp/Call us @ 83329084 https://wa.me/6583329084
📧 Email us @ sales@samaudiosg.com
🗺️ Visit Us @ Sim Lim Sqr #01-56, S188504 - Demo units available (Lvl 1 Beside Escalator)

As per Audio Technica policy, all needle, stylus and cartridges are NOT covered under warranty.

--
The AT-V95ML features a 2.2 x 0.12 mil Nude Microlinear (diamond tip) stylus that fits half-inch mount turntables. The performance of a line contact stylus will minimize the "inner groove distortion" as well as providing extended frequency response and miaximize resolution in the medium. This improves the high frequencies of the audio program material. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

--
Descriptions:
>VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus
>Aluminum cantilever
>Durable low-resonance polymer housing
>Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
>Compatible with any AT-VMN95 replacement stylus
--
Specifications:
>Frequency Response : 20-25,000 Hz
>Channel Separation : 23 (dB at 1 kHz)
>Vertical Tracking Angle : 23°
>Vertical Tracking Force : 1.8-2.2 g (2.0 g standard)
>Stylus Construction : Nude square shank
>Recommended Load Impedance : 47,000 ohms
>Coil Impedance : 3.3 k ohms (1 kHz)
>DC Resistance : 485 ohms
>Coil Inductance : 550 mH (1 kHz)
>Recommended load capacitance : 100 to 200 pF
>Output : 3.5 mV (1 kHz, 5 cm/sec.)
>Channel Balance : 1.5 dB (1 kHz)
>Stylus Shape : 2.2 x 0.12 mil Microlinear
>Cantilever : Aluminum pipe
>Mount : Half-inch
>Weight : 6.1 g (0.22 oz)
>Dimensions : 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
>Replacement Stylus : AT-VMN95ML
>Accessories Included
>Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver