[🎶SG] REKKORD M500 Advanced Manual Sub-Chassis Turntable

🎵 OFFICIAL REKKORD DEALER - 1 Year Local Warranty & Aftersales Support

Contact Us:
📞 WhatsApp/Call us @ 83329084 https://wa.me/6583329084
📧 Email us @ sales@samaudiosg.com
🗺️ Visit Us @ Sim Lim Sqr #01-56, S188504 - Demo units available  (Lvl 1 Beside Escalator)

--

REKKORD M500 
Advanced Manual Sub-Chassis Turntable

> 8,3” aluminium tonearm with cardan bearing
> E(asy)motion Wire inner tonearm cabling
> Stiff carbon fiber headshell
>  Preadjusted Ortofon 2M Blue cartridge
> Solid MDF base chassis
> Decoupled sub-chassis mounted on parabolic springs
> Specially buffered aluminum feet
> Damped aluminum platter with antistatic felt surface
> 33/45 RPM electronic regulated DC motor
> Belt drive with polished flat belt
> Viscosity-damped tonearm lift
> Made in Germany

--
Descriptions:

> As the first manual REKKORD turntable in our M series, we set the bar very high with the REKKORD M500. The aim was to develop a manual turntable based on the technically high-quality REKKORD tonearms, which combines a heavy basic chassis with a floating sub-chassis in a modern design. Despite the slim design, the basic chassis has the necessary mass to dampen any kind of impact noise and vibration from the outside. The aluminum-covered sub-chassis is floating on four special parabolic springs and is therefore decoupled from the rest of the chassis. This ensures an additional minimization of external interference. Three specially buffered aluminum feet in combination with the cardan tonearm mounting make time-consuming leveling of the turntable unnecessary. Of course, the high-precision anti-skating and tracking force settings of our fully automatic machines are also used here. A problem-free and uncomplicated installation is therefore always guaranteed. The M500 is not only convincing on the outside. The M500 is available with and without the high quality Ortofon 2M Blue cartridge which reproduces every detail in the recordings. Voices and instruments sound even more natural than before. Cables, dust cover and a single adapter comes supplied with the turntable.

> Available with pre-adjusted Ortofon 2M Blue
> The 2M Blue is an audiophile MM cartridge that delivers a wide but detailed soundstage with an overwhelming clarity.

> 8,3'' weight-balanced tonearm
> Ultra low mass (ULM) aluminium tonearm with cardan bearing from our own production.

> Damped aluminum platter
> The solid aluminium platter has a damping ring on the inside that helps to dampen all resonances and minimizes wow and flutter.

> Massless tracking force
> Massless tracking force adjustment which optimizes the center of gravity directly at the bearing center.

> Floating sub-chassis
> The platter and the tonearm are decoupled from the rest of the chassis by the sub-chassis system.

> Heavy MDF chassis
> The main chassis is made out of a single piece of MDF which has an ideal resonance-dampening basic character.

--
Specifications:

> Wide x Height x Depth: 440 x 130 x 370 mm
> Weight: 5.5 kg

> Speed: 33 & 45 RPM
> Drive system:    Belt drive
> Wow & Flutter: 0.06%

> Type:    Moving Magnet (MM)
> Model: Ortofon 2M Blue
> Stylus:nNude Elliptical
> Frequency response: 20-20.000 Hz
> Channel Separation: 25 dB
> Load Impedance/Capacitance: 47 kOhm / 150-300 pF
> Weight: 7.2 g
> Recommended Tracking Force: 1.8 g

> Output: Phono RCA + Ground Cable

External Power Supply
> Voltage: 12V DC
> Current: 150mA

> Accessories: Cable, Dust Cover, Singles Adapter

--